Week  14 ( FYP 2)

Title :  Presentation day for FYP2.

CONTENT :

For the presentation day, with the poster that been pinned behind the booth and the wireless pigeonhole that placed on the table, the presentation and accessing process run smoothly.

The accessor for the Development Of Wireless Pigeonhole Using Microvontroller:  

1. MDM NORHASLINAWATI RAMLI
2. SIR KAMALULFAIZIN MOHD SUHUT

Session Photography with Mdm Azliza Arshad ( supervisor )

Another Session photography with the project and other Candidate 

Week  13 ( FYP 2)

Title :  Designing the poster for the presentation day.

            Renovating  the wirelesss pigeonhole.

OBJECTIVES :

1. To make the wireless pigeonhole more understandable.
2. To design the poster to be both eye-catching and informative.
3. To create a scene that fits the environment of  the presentation day.

Format for the poster :

The poster contains :

1. Title, Student Name and Course.
2. Objective
3. Product Description
4. Methodology
5. Flowchart
6. Result
7. Conclusion
8. Reference 

Image Of Poster Project 

Renovating  process of Wirelesss Pigeonhole :

Labelling Process : 

Week  12 ( FYP 2)

Title :  Running the component while implementing the coding.

OBJECTIVES :

Connecting the Arduino Nano with :

                             1)  IR sensor.

                            2)  Bluetooth devices.

                           3)  Usb cabel.

                           4)  Lcd 

Video on how the my wireless pigeon hole running when supply inserted :

Week  11 ( FYP 2)

Title :  Progress on hardware.

OBJECTIVES :

1) Drilling the hole to insert the paper (assignment).

2) Smoothen the surface that been drilled.

Cutting and Drilling process :

Smoothen process :

Week  10 ( FYP 2)

Title :  Second briefing for FYP2 student .

OBJECTIVES :

1)  Explaination about the Poster.

2)  Explaination about the Thesis for FYP2.

Briefing content :

Lecturer exposing to the student about the poster and thesis :

1)  Explaining about the format for poster and thesis.

2)  Englightend about what will occur during the presentation day.

Week  9 ( FYP 2)

Title :  Testing the coding for Arduino Nano  ( Counter )

OBJECTIVES :

1)  Testing the coding counter.

2)  Verifying the coding for the counter

Testing and understand the coding for the counter :

After compiling :

CONCLUSION:

The coding for the counter is succesfull.

Week  8( FYP 2)

Title :  Understand on how using the arduino software for Ardunio Nano

OBJECTIVES :

  1)  Downloading arduino software.

  2)  installing the arduino software.

Downloading the arduino 16.7 :

Installing the arduino software :

Week 7 ( FYP 2)

Title :  Changing Arduino Uno to Arduino Nano

OBJECTIVES :

Why uses of Arduino Nano are more compatable than Arduino Uno for this project?

·        Because this project have just a few outputs.

·         More cheaper than Arduino Nano.

.         less complicated

Images of Arduino Nano :

Specifications:

Microcontroller                                  Atmel ATmega168 or ATmega328

Operating Voltage (logic level)           5 V

Input Voltage (recommended)            7-12 V

Input Voltage (limits)                          6-20 V

Digital I/O Pins                                  14 (of which 6 provide PWM output)

Analog Input Pins                               8

DC Current per I/O Pin                     40 mA

Flash Memory 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by bootloader

SRAM 1 KB (ATmega168) or 2 KB (ATmega328)

EEPROM                                          512 bytes (ATmega168) or 1 KB (ATmega328)

Clock Speed                                      16 MHz

Dimensions                                       0.73" x 1.70"

Length                                               45 mm

Width                                                18 mm

Weigth                                               5 g

Week 6 ( FYP 2)

Title : Research about the Arduino Uno

After meeting with the supervisor, me and mdm azliza have come to a conclusion that I can change from using microcontroller ATMEL to using Arduino Uno.

OBJECTIVES :

• To understand about Arduino Uno.

·         Function of  Arduino Uno.

·         Learning the Schematic of Arduino Uno .

Image of Arduino Uno

Arduino Uno schematic

  The Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. You can tinker with your UNO without worrying too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.

As for the conclusion, I preffered using Arduino Uno than microcontroller ATMEL because it more easy and simple to comprehend.

Week 5 ( FYP 2)

Title : Buying the project hardware.

OBJECTIVES :

• Purchasing a drawer.

 

Front View

Side View

RECEIPT :

• ·         The drawer acts like a pigeon hole.
• ·         The drawer are suitable to achieve the goals of this project.

Week 4  ( FYP 2)

Title : Briefing for FYP 2.

OBJECTIVES :

• Guiding student  on the scheme of work for FYP 2.
• To guide the student for the FYP 2 guideline .

1.     Introduction.

2.     Objective of FYP 2.

3.     Scope of project.

4.     Project assessment.

5.     Presentation.

6.     Deadline of the project report.

As for the conclusion, I have know more about the rule and the scheme of work for FYP 2.

Week 3  ( FYP 2)

Title : progress of project.

OBJECTIVES :

• Go to Jalan Pasar to buy the component.
• Changing GSM with Bluetooth device.

The point of changing the GSM with Bluetooth is because of the GSM modem are more complicated to comprehend and the Bluetooth device are more cheaper than the GSM.

The price comparison between GSM modem with the Bluetooth devices:

Bluetooth : RM 64.50

GSM modem: RM 109.00

As for the conclusion, I have preferred using the Bluetooth devices compared to the GSM modem, GSM modem are more better but the coding are to complicated.

Week 2  ( FYP 2)

Title : The progress of the project (coding)

OBJECTIVES :

• To know more about the GSM Modem functions.
• To study the GSM for texting coding.

For my purposes in this project, I have a dedicated "GSM Modem" that looks like this:

The GSM coding for texting (sms) :

As for the conclusion, the coding are a little bit hard to understand and need more research to comprehend it.

Week 1  ( FYP 2)

Title : Preparation for FYP 2

OBJECTIVES :

• To know about the price of the component that needed.
• Ask supervisor about the project 
• Update the latest progress of the project.

the list of component that needed to purchase:

1.     Microcontroller   : RM 10.00

2.     GSM                   : RM 109.00

3.     IR Sensor            : RM 82.50

4.     Project hardware: cabinet / mailbox.

As for the conclusion, the meeting with the supervisor were running smoothly and the supervisor asking the student to continue the progress of the project and keep updating to the supervisor in case of anything.